7.5HP Reciprocating Air Compressor - 80 Gallon (RS07)

The RS07 is a 7.5 HP two-stage reciprocating compressor built for continuous commercial and industrial duty in workshops, fabrication plants and service facilities. It delivers 25 CFM @ 175 PSI / 24 CFM @ 100 PSI and can be wired for 208-230V/460V single-phase or three-phase power at 60 Hz. Typical current draw is 1-phase 32A @ 230V; 3-phase 18A @ 230V, 9A @ 480V. Its two-stage cast iron pump uses Swedish steel valves and needle bearings at both ends of the crankshaft, and the valves can be reached without removing the cylinder heads. An enclosed belt guard houses an aftercooler, an automatic tank drain clears condensate, and a low-oil monitor shuts the unit down before the pump can run dry. The motor is an industrial unit with a factory-mounted, pre-wired magnetic starter and UL-listed controls. The three-phase motor is totally enclosed and fan cooled (TEFC). Start and stop are automatic, with a centrifugal unloader that takes load off the motor at each restart. Compressed air collects in a powder-coated, ASME-tested 80 gallon receiver; the vertical tank keeps the floor footprint modest. A tank discharge ball valve, stainless steel flex lines and a heavy-duty intake filter are all included. Vibration isolation pads come with the unit to cut noise and protect the floor.